Blog

Local Tulsa Utility Company Links

City of Tulsa Water

Oklahoma Natural Gas

Tulsa Energy Now

Quick Reads of Important Water Heater Topics

Preventing Legionnaires’ Disease

Legionnaires’ disease. . . is easily picked up by breathing in contaminated water – such as mist from your shower, spray from a fountain or a hose, and even steam from hot tubs and cooking. The easiest things you can do to help keep your family safe is to ensure you maintain adequate levels of disinfectant in places where warm water sits (like hot tubs or fountains) and that you keep your water heater set at 140°F (60°C) or higher to ensure bacteria cannot grow in the tank or in the pipes as the hot water circulates.  http://theplumber.com/preventing-legionnaires-disease-in-your-home/

Shorten the distance hot water travels

Water is wasted down while you wait for the right temperature. One solution is a recirculating pump that moves hot water to the outlet while bringing cold water back to the heat source. In this scenario, water is not wasted, because hot water is automatically pumped to the fixture before the consumer turns on the water.  https://www.safeplumbing.org/what-you-can-do/be-water-efficient

Ways to Save on Water Heating Costs

There are four ways to cut your water heating bills: use less hot water, turn down the thermostat on your water heater, insulate your water heater, or buy a new, more efficient model.  http://energy.gov/energysaver/tips-water-heating

Learn more from ENERGY STAR on water heaters and check out their comparison chart of certified heaters.

Ways to Prevent Safety Concerns With the Home’s Water Heater

Posted by on Oct 13, 2016 in Water Heater Maintenance, Water Heater Safety | 0 comments

The warm water heater within the residence can cause several of the greatest calamities to a residence. Fortunately, they operate without the requirement of a lot of regular care and rarely without any sort of large issue. Nevertheless, the potential for explosion, electric shock, skin burns, fire are all possible. Due to this, it is important for all Tulsa homeowners to be knowledgeable about just how their hot water heater works. That could begin by having a look at the owners manual.

It is very easy to ignore ones household hot water heater for they are usually unseen. They live in the garage, the cellar, a storage room, or some place else that is concealed. It is all also easy to forget points if they run out sight.

Maintenance actions like draining the water storage tank every 6-12 months and testing the T&P valve are steps that have to be carried out, If one leaves the residence for over two weeks hydrogen gas has the capability to buildup inside an electrical water heater. These are simply a couple of elements of a hot water heater need to find attention to avoid a big hazardous situation from occurring.

Once more, see to it to review the handbook for ones hot water heater. If you do not have one, perhaps the current water heater was put in by a previous homeowner, yet you should have the ability to look up online the brand name and model of heater to locate it. A few of the more crucial facets to learn about are the electrical dangers of the heater and just how they operate. With heating elements being electric and submersed in water, the heating elements are most likely to deteriorate as they age. A person can obtain an electrical shock by touching the metal housing of the water storage tank, or metal pipes, if the heating elements short out. The majority of home owners are not experienced with how to repair electrical devices, which is why we are constantly right here to assist Tulsa home owners with they hot water heater requirements.

Potential Tulsa Water Heater Issues

One does not need to stress over understanding if ones hot water heater has something major wrong with it. All homeowners will know when it does. However, it is discovering how to spot the initial indicators that something is beginning to fail takes a little practice. One very easy way to know if there could be a trouble is to think about the last time you executed any kind of preventative upkeep. If the response is never, or a long time ago, it is definitely a good time to do an inspection of the following information.

It needs to not be a huge surprise that a water heater can leak water, however this truly is among the greatest actions from the heater when there is a problem. The root cause of a water leak can be as a result of different points though. Not every one of them mean that the water heater is going to need to be replaced, which is a good thing. There could simply be some condensation underneath the storage tank, or simply a little water beneath the tank. Maybe a slow drain shutoff leak which can be an easy, inexpensive repair. It could be a little leak from around the T&P valve, which additionally does not need to be a pricey repair. If it is a larger leak, or if water is constantly dripping and all the shutoffs are okay and all the fittings are not loose, it is not a great sign. That, with any type of indications of rust will typically recommend that the storage tank is rusting inside, which will be a factor for a water heater substitute.

The most significant danger with a larger water leak is the damage it could easily cause to the structure and home furnishings of ones house. 30 to 50 gallons of water within ones residence may destroy many points swiftly. If the container is rusting inside, it can easily burst.

Fires could begin in the spot of ones water heater. The pilot light of a gas water heater has a flame. If there are vapors nearby, a fire could begin. For example, if ones heater is located in the garage, and if there is paint, gas for a mower, or cleaning products nearby, it could be the source of a fire. Storage any kind of flammable product far from the heater.

The federal consumer agency is looking for some way that manufacturers can design water heaters so that they resist igniting volatile fumes. But that may be more difficult than it sounds. . . (read more here)

Heating from the temperature level of the water is an opportunity. We would not recommend having the thermostat over 120 degrees, and if one has kids, a reduced temperature is suggested. It is good to ensure the thermostat does not get bumped by mishap. The thermostat can additionally end up being faulty and could generate water that is too hot or not hot enough.

Gas and tankless hot water heater create carbon monoxide while they are operating, considering that they use natural gas or propane as a fuel source. This gas is ducted outdoors and far from home owners. This is just among the big risks of property owners attempting to install a brand-new hot water heater themselves. There are specific methods to duct the heater to make certain all carbon monoxide gas goes outside.

Property owners must have a CO2 detector set up in the residence. Because it is an odorless gas, it is tough to understand if it exists in the home. Indicators of it are if those in the home are having migraines, vomiting, really feeling weak, or woozy. There are extra signs than these. Learn more regarding them from the Centers for Disease Control. Go directly to the healthcare facility if you really feel someone in the residence has these signs and call the gas company to inspect for gas.

It is an unusual event for a water heater to explode, but it is still something that could happen. The T&P valve manages the build-up of pressure inside the water storage tank. If this valve is stuck or is regularly being released, give us a call quickly.

Hot Water Heater Maintenance for A Long Life

At some point, ones water heater will need changed. Parts will at some point fall short or the storage tank will at some point begin to rust, despite having the best maintenance plan. There is no particular means to understand the number of years it will last. It will depend upon the amount of use, top quality of the water, and amount of upkeep that it gets. With the maintenance checks that property owners can do to be certain everything looks all right, it is still a good idea to have a specialist plumbing professional come check it every few years also.

The adhering to infographic reveals some of the most vital upkeep that home owners must be doing. These, along with anything that the proprietors manual one has should be complied with.

Tulsa Water Heater Safety Maintenance

From Visually.

Concise History of Water Heaters

Posted by on Jul 6, 2016 in water heater technology | 0 comments

Much like a bunch of creations we utilize today, the beginnings of the modern-day hot water heater is not easily be mapped back to merely one person or culture as its developer. It may not be as strange as some inventions however it is certainly a creation that we utilize on a daily basis. Having heated water in houses has helped make our lives simpler and much healthier, and must not be something we forget about.

It makes us laugh a little when we read information and see advertisements for tankless hot water heaters with the advertising message of “instant hot water.” Of course, it would be remarkable to have, and certainly it can save water that would run down the drain as one awaits the heated water to travel through ones home plumbing pipes from the water heater to the faucet; yet are we that spoiled that we can not wait a few seconds for the heated water to flow out? In this article we are going to be taking a look at several of the societies and people who have actually assisted with the development of bringing heated water into the residence for us to appreciate this modern convenience.

I remember viewing old Western movies when I was a youngster and people would fill tubs with water heated up from a range or fire. This was a time consuming procedure, yet just what individuals did before having the creation of a water heater. Over the past one hundred years approximately, fortunately this experience is not needed any longer.

The Romans had their hot baths, which is generally considered to be an early form of water heating. They had an outstanding approach of heating their buildings with circulating air heated from a fire below the floor. Type of like a very early type of radiant floor heating. They used fires to heat water in large lead boilers located over the furnaces. This was utilized for their huge bathroom houses which were like saunas.

Currently we are going to go ahead in history to the English painter, Benjamin Waddy Maughan. He had the very first patented for a Maughans Water Heater The Geyserwater heater in 1868. In his invention, natural gases heated the water yet there was not a flue to eliminate the gas vapors that are created while doing so. This was the first time that gas, not a solid fuel was made use of in heating water. This invention by Maughan had the cold water move through wires that were warmed by the hot gases of a burner. The heated water developed then went into a sink or bathtub. It was called The Geyser, for the inventor had the concept from an actual water hot spring.

Due to Maughan’s absence of air flow, his water heater was not used inside the house. Today, if a water heater is not ducted effectively, carbon monoxide can get into the house, which is a huge problem.

Maughan’s innovation did go on to affect Edwin Ruud, a Norwegian mechanical engineer that was the creator of the automatic storage hot water heater in 1889. In the 1880s in Pittsburgh, Rudd began the process of finding out how one can produce hot water safely. The business he began, Ruud Manufacturing Company, is still a leading maker of water heaters today. By the time of Rudd’s death, he managed to change the daily hygienic habits of the majority of every American.Rudd Water Heater Patent

The following is from Rudd’s patent:

In a patent obtained by me December 30, 1890, No. 443,797, I have described and claimed certain improvements in Water-heaters, such improvements consisting, generally stated, in certain mechanism controlled by the temperature of the Water in the boiler for regulating the flow of gas to the burner employed for heating the boiler.

The present invention has for its object a construction of the regulating Inechanism, whereby the flow of gas to the burner may be more nearly proportioned to the quantity of cold water admitted; and in general terms the invention consists in the construction and combination of mechanical devices or elements, all as more fully hereinafter described and claimed.

In the accompanying drawing, forming a part of this specification, is shown a sectional elevation of a water-heater having my improvement applied thereto.  (read more. . .)

In England around 1895, Ewart & Son released a gas fired hot water heater called the Royal Geyser. It would certainly be set up alongside a bath tub. It was gas fired and heated water which was entering into the tub. The hot water was combined with cold water to produce the temperature level one wanted. The innovation was a little fragile, for if the water was shut off before the pilot light being shut off, it would generally ruin the appliance.Ewart Royal Gyser Water Heater

The 1900s are thought as the golden age of water heaters. There are lots of business that began in the USA, providing new ideas and technologies to constantly enhance the general design. We have electric, gas, tankless as well as solar water heaters today, all of which have a remarkable background for their developments.

I mentioned tankless water heaters in the intro of this write-up. Though lots of people still consider them a recent item in the plumbing world, but they were in fact initially created in 1929! Stiebel-Eltron produced the initial electrical tankless heater, or coil immersion heater.

Various other terms used to describe hot water heater that are still around today are an electric water boiler, electric dispensing pot, geyser, or electric water urn.

So there is the concise past of the modern water heater. Try to bear in mind that it is a residence appliance that does need a little care from time to time too. Ideally our Tulsa water heater clients will certainly be able to not take their hot water heater for granted more and will certainly make certain to below appropriate upkeep steps.

Click to download a PDF of this article.

Aquanta Water Heater Technology

Posted by on Jun 23, 2016 in water heater technology | 0 comments

It is well know, and the U.S. Department of Energy informs us this too, that heating water uses about 18 % of the regular home’s annual energy consumption. The only other house appliance that makes use of more is the heating and cooling system. With the common storage tank water heater that many homeowners use, it is maintaining 40 to 50 gallons of water hot all day no matter when it is being utilized. Typically with this situation, 20 to 50 percent of the power being utilized is completely thrown away. Just what are some options to aid suppress this power loss? The company Aquanta, use to be called Sunnovations has actually been working on a feasible remedy for numerous years.Aquanta Water Heater Controller

Sunnovations had a crowd-funding campaign in 2014 that did not get to its full funding yet that is fine with them for they were able to garner bunches of interest from distribution companies that has actually proved fruitful with a 2nd attempt now. Aquanta is currently taking pre-orders on a brand-new smart water-heater controller, which they believe will be delivering in July this year.

Aquanta’s CEO Matthew Carlson states that the company’s new technology has been field tested for over a year currently. It is surprising that other companies have not started working on a comparable gadget, particularly with the first crowd-funding campaign … despite it not being successful for them originally. Because hot water heater typically have a life of 8 to 12 years, it is not rational to replace it when it is functioning okay, however just does not have all the modern-day technology that a brand-new hot water heater might have. Several new hot water heater designs are utilizing smart modern technology features, yet there is absolutely nothing that will function with any type of current hot water heater to “make it smart.” Sears just recently put out a water heater controller that will work on several of its versions, however not all of them and not on different companies water heaters.

The only other gadget that is only a little comparable is a hot water heater timer. However it functions like a timer, turning the heater (and only electrical hot water heater) on and off at specific times of the day; and not using smart technology.

Among the features of the Aquanta technology is it will certainly “learn” exactly what the water use patterns are inside the home. Most people have the tendency to shower, operate the dishwasher and various other hot water using devices around the very same time of day. The device will function to adjust the water heater’s temperature to satisfy the demand during peak times, and lower the power usage during non-peak times.

The Aquanta will be located on top of a water heater. A probe is set up behind the T&P valve port and after that the probe is connected to the controller. A second sensor gets taped to the cold water supply. An optional 3rd probe is developed to detect if there is a water leak from the water heater also.

Finally, the controller needs to be attached to a Wi-Fi network and property owners will install the smartphone app on a phone. The controller links to Aquanta’s cloud-based server and begins its job of finding out the house’s hot water usage patterns. It is likewise possible to manually enter in the water use pattern too. So, it could manually and automatically regulate the heater’s energy use.

It is developed so DIY homeowner can handle the setup him or her self. If a property owner doesn’t feel up to the activity, a plumbing expert can absolutely help the company mentions. Aquanta approximates it taking about 40 minutes for a property owner to complete the install.

The system will connect with the majority of hot water heater, despite the energy kind. It depends on the power source if it will certainly work or not. There should be an electronic ignition system, which most all more recent hot water heater will have. Old gas heaters may not however. Absolutely take a look at the compatibility details on the company’s website right here to see.

Precisely how much power, and then equated into money, can a home owner conserve with the unit? Right here is exactly what Aquanta claims on their website: “our data suggest that at least 20% and up to 50% of that energy in a typical home is wasted through ‘standby loss’. We are being careful to not overpromise, and have 3rd party testing underway to more specifically quantify the saving opportunity. However, our internal studies and modeling suggest that between 10-30% of water heating energy can be saved by intelligent control through Aquanta. The economic value of intelligent control of water heaters is much higher when factoring in peak or time-of-use pricing and utility peak demand reduction and similar incentives.” (read more here)

What others around the internet are saying:

www.greentechmedia.com

www.treehugger.com

Back to our blog. . .

Click to download a PDF of this article.

Discolored Hot Water Reasons

Posted by on Mar 1, 2016 in Electric Water Heater Repair Tulsa, Gas Water Heater Repair Tulsa, Water Heater Maintenance, Water Heater Repair Tulsa | 0 comments

There may be times when Tulsa house owners will have brown or rust colored water from the taps. It could be, however generally is not the main indicator that a persons water heater will should be replaced, so do not panic. There are a couple of reasons that this can take place that we will certainly consider right here. The initial facets to look at are the age of the hot water heater and also to complete a few troubleshooting actions to see if that improves the problem (pun intended).

Sources of Rust Colored WaterDiscolored Tulsa Water Heater Water

Even if ones water heater is only a couple of years of ages, it may still create tarnished hot water and also it will not mean that the device is about to give out. Galvanized iron plumbing will corrode with time and could release rusty to dark brown water throughout a house’s plumbing system. First establish the age of ones water heater. If it mores than 10 years , there are different aspects of it we will searching for to have a look at. If it is newer, and also there are copper or plastic supply of water lines, the water shade might be as a result of a short-lived disturbance in the public supply of water. The very best way to check this is to switch on a cold-water faucet. If the water that appears is blemished, the water heater is all right. If the water is clear, the water heater will require a little bit of upkeep.

Right here is another means to examine if it is the hot or the cold water line that has the stained water. Imagine the water heater as a large pipe. The water moves right into it swiftly. It may be bring rust from the water main or from a bad well point. When it enters to the water heater, the large pipe, it sheds velocity and pressure. Whatever comes in will be up to the bottom of the tank. Each time water is extended of the tank, the dip tube agitates the sediment at the bottom of the tank as well as it will eventually leave the top of the tank. Take a clean portion of a bed sheet and drawing it up tight over a faucet. Open the cold water on completely. Let it to run for about two minutes. Have a look at the piece of cloth. Does it have a round tan or brown circle? If it does, this will reveal that the problem is with the cold water and not the water heater.

Rusty Water Pipes

Rust from ones water pipes could be the factor for discolored water in the residence. Pressure could fluctuate inside a water pipe, especially when the supply is switched on and off. This change could loosen up rust that is on the inside wall surfaces of the water pipe. The rust falls into the water moving with the pipe and transforms the shade of it rusty. Often the galvanic layer of a pipe peels off from the inside of the supply of water line or the layer of magnesium over an anode rod comes off and reveals the layer of iron beneath. Water in contact with iron decision turn it a little brownish.

Is the Discolored Water Harmful?

Although iron and manganese are thought as impurities, consuming water containing them is not unsafe. Our bodies do need a little quantity of them daily in fact. However, one requires to be mindful in terms of bacteria growth that rusty pipes that crack as they corrode can be a breeding place for. Pollutants from the air could enter pipes that have splits. Also, if the water pipes are leaking water, mold and mildew can start to grow, which has its very own set of issues for house owners to manage. The tarnished water issue does searching for to be addresses and also replaced before it can establish into much larger problems.

Other problems, though not as huge, are that the rusty water might have an odor that is not too positive. Iron in the water can leave spots on laundry, the washing machine, and on ones hair possibly. Besides, rust particles in water pipes can clog as well as may create sinks to back flow.

Removing Rust Colored Water

If both the cold and hot water lines have brownish water coming from them, then it is a larger trouble. First, the local utility business could be doing some upkeep or something that is disrupting the service. If it proceeds for over a day, provide them a call to see if they have been doing any type of work close by. If they are not, the cause is possibly with the primary supply of water pipe at some point prior to it branches off to other parts of your home. Galvanized pipes are the prime offenders if brownish water has actually been originating from the taps. We may assist check this more and see if new pipes require to be installed.

As a whole, yearly maintenance needs to be executed on ones water heater. This consists of flushing the water tank by running cold water through it to clean any kind of debris that will normally develop in the tank. Flushing the water heater additionally keeps inner components clean and free from rust or mineral build-up. One of the most exciting reward for doing is it will certainly expand the life of the water heater. We will certainly be discussing the process of rinsing the heater in the near future and will not enter into all the information here. Though a lot of home owners can flush a water heater on their very own, we would certainly like to be able to show you the best ways to do so the very first time a minimum of, so correct safety steps are taken.

Here is a video for now, that illustrates draining a water heater:

Iron filters or water softeners installed where water gets in the pipes in ones residence can assist protect against a reappearance. If one has water from a well, these are good suggestions to remember. If ones water heater is more than 10 years old, there are various other indications that might be starting, or have actually currently begun, that will recommend that it will certainly searching for to be changed quickly. Anything uncommon with a water heater need to constantly be taken as an indication that some kind of maintenance is required, and should not be ignored. We are always readily available to our Tulsa neighbors for any type of type of water heater repair or service.

Click to download a PDF of this article.

Stopping the Cause of a Water Heater Leak

Posted by on Feb 24, 2016 in Electric Water Heater Repair Tulsa, Gas Water Heater Repair Tulsa, Water Heater Repair Tulsa, Water Heater Replacement Tulsa | 0 comments

A leaking water heater might or may in no way look like a huge issue. Nevertheless, it is not important if it is a big leak or a tiny leak, each one can lead to a lot of damage for ones residence in the shape of water harm. Many times property owners forget to realize that a tiny leak is usually the indication of something greater that may be beginning to occur, or may happen in the not too distant future. In the worse scenario, that tiny leak could turn into a significant deluge if the water heater is near completely giving out. At any rate, we are right here to help with any kind of Tulsa Hot Water Heater Repair which may be needed.

As well as water damage to ones house via a leaking storage tank, there can be health related issues with any type of water leak within a house. The wetness can result in mold or mildew development. People who are afflicted by allergies or asthma, it’s not a pleasant problem. The EPA alerts that certain mold spores are hazardous and can result in serious health issues.

Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.  http://www.cdc.gov/mold/dampness_facts.htm

Expecting that a current water leak will fix itself and simply just disappear is a thing that just doesn’t materialize sadly. Plumbing leaks mainly deteriorate with time. We have prepared a step-by-step list of measures to do in these cases.

Action Steps for Leaking Water HeatersLeaking Tulsa Water Heater

1. Initially ensure it is the water heater that the leaking water is originating from.

When there is water around where the hot water heater can be found, the leak might not necessarily be coming from it. Have a look at all water pipes or various other things close to where the heater is situated. Are there any other home appliances in close proximity that may generate moisture build-up? If ones heater is located in a basement, this might be the case. It could sometimes be a furnace drain line as well, or from a water softener.

First, wipe up the water and find out if it comes back any time in the near future by paying attention to the place routinely. Go over the water heater completely to verify if any water is from any of the fittings, T&P valve, or drain valve. If it is fully dry, continue to check out different things and locations close by.

When absolutely nothing else is damp in the general space, put paper towels on the floor in the spot that was already wet. Look at it each hour roughly to verify the paper towels are still dry. It can be much easier to notice the paper towels getting wet then the ground. After a day if nothing is wet once again, there ought to be nothing at all to concern yourself with, but still keep a watch on it for a few days. In instances where water is returning, and there is not any other supply in close proximity that it could be from, we will continue to the next step here to diagnose the source of the leak.Breaker Box for Tulsa Water Heater

2. Turn the water heater’s power off

Preferably, it is common knowledge that water and electrical power never go well together, so switch off the power for safety explanations.

For gas water heaters, there ought to be an on/off dial that should be established to the off placement. Keep the gas line on at this time still.

For electric heaters, head to the house’s circuit breaker box and turn off the breaker to the water heater.

3. Turn the water supply off

If one is sure the leak is because of the hot water heater, and in case it is fairly substantial, turning the water off will get rid of the chance of water continuing to fill up the storage tank and leak inside ones home. Again, with a big leak from the heater, and if the shut off valve is unable to be gotten to or if it happens to be not working correctly, go locate and shut off the main shut off valve for the whole residence. If one continues to be uncertain the leak is coming from the water heater, one may keep the water supply on for the present time.

One should be careful that water from the storage tank shall be hot and may burn ones skin. Most heaters will probably be established to a temperature of at the very least 120° F, that can cause first degree burns on contact.

4. Find the leak’s location

We do not need our Tulsa water heater clients to self diagnose their leaks prior to contacting us, notably should there be a serious water leak situation happening, but in case one can the faster we can help. Next is a summary of potential reasons why the leak is appearing.

Leaking Water Connections
Examine to be certain the cold water inlet and the hot water outlet connections are not loose. They’re usually found at the top of the storage tank. Make use of a pipe wrench to check they are tight. This is an easy fix if perhaps this is from where the leak is emerging.

Leaking T&P Valve
Found on the side of the storage tank is the temperature and pressure relief valve. It will also have a drain pipe running down to the ground from it. The valve regulates the quantity of pressure which forms inside the storage tank. It will let water out when it must regulate the pressure. This valve may perhaps be the origin of the leak and might need replacing whenever it does not stay closed tight. Glance to verify if any water is leaking via the valve. If water is coming from the valve when its in the shut position, a new valve is going to be necessary. This really is an important valve of the hot water heater, and one that really needs to work properly. However, replacing it is simple enough and not costly.

Danny Lipford suggests that:

Pressure relief valves sometime develop a drip when opened for the first time in years. Try opening and closing it a few times to see if it will seat itself. http://www.todayshomeowner.com/repair-leaking-water-heater-pressure-relief/

First, analyze to determine if there may well be debris in the valve. Set a container under the discharge tube and open the valve simply by pulling the handle on the valve. The water that is released may flush the valve and clear away any debris that could be in the way.

Some other reasons for a T&P valve leak could be high water pressure with the local water system, or from a backflow preventer found close to the water meter.Leaking Water Heater Drain Valve

Leaking Drain Valve
Look at the drain valve towards the bottom of the heater. They’re commonly composed of plastic, and for that reason, might break in time. Ensure that that it really is shut completely. If the drain valve needs replaced, it is a basic fix.

A drain valve leak may be caused by debris inside the valve. Accomplish this first. Position a container below the valve and turn the valve to open it. Draining some water may well eliminate the debris. If perhaps after flushing, it is still leaking, it will need to be replaced.

If the leak is coming from here and the valve keeps leaking since it needs changed, try attaching a garden hose to it and have the hose go outside the house. With some luck, that could get rid of the water leaking indoors.

Leak on the bottom of the tank
When the tank leaks from the bottom, it implies a major internal situation. On account of precisely how the water tank is made, being covered inside of insulation and having an external layer, in case it is leaking, it is going to not be visible from the exterior. An interior water leak ordinarily will be observable in the bottom of the tank. The more aged the storage tank is, the more probable its starting to rust and deteriorate. A rusting tank will require to be changed.

5. Will I require a repair or replacement water heater?

From our working experience, we are able to execute a repair to take care of the leak, much more often then needing to replace ones heater. The sooner we could examine the scenario, the more quickly we can conduct a repair previous to the damage getting even worse. We do highly advocate that any repairs or replacements be executed by a professional and not oneself, to make certain they are performed correctly and up to code. Frequently, manufacturer warranties could be voided if a non-licensed person works on it.

Click to download a PDF of this article.

Thermal Expansion at Home

Posted by on Feb 21, 2016 in Water Heater Maintenance, Water Heater Repair Tulsa | 0 comments

What is Thermal Expansion?

Thermal expansion is a major plumbing issue. However, numerous property owners are generally not conscious of this unique issue because a lot of homes are not in jeopardy. However, a lot of homes that are in danger of developing this plumbing problem are not properly safeguarded because code requirements are frequently not enforced adequately for older residences. Water particles do not decrease when faced with pressure or cold, but they can enlarge when heated up. In fact, water may expand by half a gallon or over in a 40 gallon water heater tank. This expansion might lead to significant problems in a residence that makes use of a closed plumbing system. Thermal expansion can bring about depleted seals, damaged solenoid valves, and bursted pipes. Thermal expansion may also shorten the life expectancy of ones water heater and, if employing a gas or propane powered water heater, may cause the water heater flue to collapse creating a carbon monoxide leak. It’s crucial to find out whether or not your residence employs a closed plumbing system and, if it does, the precautions to take to safeguard the property from thermal expansion problems.

How to Know if Ones Property is at Riskwater heater thermal expansion tank

A property is vulnerable to thermal expansion issues in cases where there is a closed plumbing system, as opposed to an open system. In an open plumbing system, water inside pipes can exit into the city water main via a supply line if fixtures aren’t being used. But, in a closed plumbing system water has no chance of leaving the home. Closed systems have one of either a pressure decreasing valve, backflow prevention valve, or a recirculating plump with a check valve. These valves are used to prevent backflow of water. Closed systems can be great if the backflow from the home can contaminate the water supply. If your house does make use of a closed plumbing system and you have already been taking precautions against thermal expansion problems and your T&P valve is leaking, you might have thermal expansion issues. The temperature and pressure relief valve is positioned on the water heater, and is a small lever which opens automatically if the temperature or pressure inside of the tank is over a predetermined setting. The normal setting is 150 psi or 210 degrees fahrenheit. The T&P valve is an emergency valve and isn’t intended to be used frequently. If it leaks, you should replace it promptly. Although, in cases where it continues to leak, it can be an indicator of thermal expansion problems.

Safeguarding One’s Home from Thermal Expansion Problems

There are 2 primary ways to avoid thermal expansion complications. Anytime a closed plumbing system is put in place, a thermal expansion device is required by Uniform Plumbing Code. An expansion tank is the common method. An expansion tank attaches to the water heater tank and gives water overflow another area to go. There are two independent chambers in the expansion tank, one for air and one for water. Air is pumped in the expansion tank to correspond with the pressure of the water. When the water is heated up, if it expands too much, it is able to overflow in the tank. Once it has cooled off or expanded to its maximum, the air inside the expansion tank forces the water into the water supply.Water Heater T&P Valve

Since the air being pumped in an expansion tank must match the pressure in the water supply, it is crucial that expansion tanks be pressurized correctly. One can find detailed manufacturer’s directions for expansion tanks and it is actually really critical to follow along with the instructions precisely. To test the pressure of one’s water, simply use a water pressure gauge on the water coming out of any faucet, and one could examine the pressure of the tank by applying a tire air gauge. In case the pressure is too low in the expansion tank, water will enter too easily, and if the pressure is too high water will not be able to get in easily enough.

Expansion tanks commonly have a maximum pressure of 150 psi and are sized depending on the capacity of the water heater tank as well as the incoming water supply pressure. It’s essential to ensure that you have the appropriate measurements for both before buying an expansion tank.

One can check the expansion tank’s efficiency whenever the water heater is not heating up water. This is accomplished by simply tapping about the tank with your fist, a coin, a key or any type of light tapping equipment. It ought to sound mainly hollow and echo a little, however if perhaps you are noticing a brief noise that resembles a thud, the tank may have water in it. Verify if there is, in fact, water in the tank by taking off the cap protecting the air valve. The cap looks like the ones found on bicycle tires and car tires. Touch down on the pin to find out if air or water comes out. In the event air comes out, everything is good, but, if water comes out you may need a new tank. Whenever the rubber splitting up the air chamber from the water chamber has deteriorated, water can fill the air chamber, in which case, you are going to have to replace the tank. If, while pressing down the pin nothing happens, no water or air comes out, the tank might not have enough air inside it. This could throw off the pressure balance within the tank. In order to take care of this situation, refer to the manufacturer’s guidelines and utilize an air compressor to fill up the air chamber.

Expansion tanks have to be serviced each year. Water heaters also have to be maintained each year, for that reason it would seem sensible to complete both servicing projects at the same time.

One more way to safeguard your house from thermal expansion are valves with discharge outlets. These discharge outlets drain the excess water that the plumbing is not able to hold. Toilet fill valves also are a great precautionary measure. These valves drain water into the toilet tank if the water expands too much.

If perhaps you use a closed plumbing system and you presently have an expansion tank, that is great! Still, be sure to have the expansion tank together with your water heater checked out every year. Still not sure regarding what kind of plumbing system is at your house? Find out as soon as possible! Even when you have implemented safeguards in the home, thermal expansion matters may appear. Call Water Heater Repair Tulsa today to learn more about keeping your property secured against thermal expansion troubles.

Click to download a PDF of this article.

Company Video Overview

Posted by on Feb 19, 2016 in Electric Water Heater Repair Tulsa, Gas Water Heater Repair Tulsa, Tankless Water Heater Repair Tulsa, Water Heater Repair Tulsa, Water Heater Replacement Tulsa | 0 comments

For many years, our business has been helping handle hot water heater repairs in Tulsa. We are a family-owned and ran company, and happy that client care is of the highest importance to us. Our goal is to supply fast, affordable and reliable water heater repair services, especially in emergency situation scenarios! Tulsa is our home as well, therefore we are very pleased of the exceptional reputation we have developed over the years.

We know how vital it is to have affordable repair prices and we strive to provide the finest priced repair and water heater maintenance services to our customers. We delight in educating our customers and writing regarding the value of preventative actions people need to take with their water heaters to help in decreasing the requirement for many repairs and for additionally extend the life of ones water heater. It can be a unsafe circumstance if one postpones attending to a hot water heater issue, not to mention a frustrating and costly error also.

We are proficient in new hot water heater installations and replacements, consisting of gas water heaters, electric water heaters, tankless water heaters, and solar water heaters. While thinking about a water heater replacement, we will give suggestions for the best design considering exactly what the water usage is for ones household. There are plenty of energy efficient brands now which will help save house owners money yearly.

If you are trying to find an honest, dependable, respectful and budget friendly plumber, we’d love for us to be your first call. By choosing us for your residential and commercial plumbing services, you will receive the best Tulsa water heater repair service possible.